Posts Tagged ‘ CV2 ’

Redline CV-2 Grease

Trackday cars are subjected to more extremes of use than road cars. The engine is subjected to more sustained hard use and the brakes, the tyres, wheel bearings and CV joints are also be worked harder with more heat generated.

Because of the harder use and higher temperatures experienced one area often overlooked are the CV joints. They will be subjected to higher temperatures, heat from the brakes especially will radiate into the CVs and driveshafts so a high quality CV grease is a good upgrade.

The CV joints in the car have already been stripped, cleaned and treated to new grease and boots and so will the spare shafts when they are cleaned and re-greased.

Redline CV-2 is my chosen grease.

CV2 Grease

CV2 Grease

Red Line Synthetic CV-2 Grease is formulated to withstand the extreme pressures and high temperatures found in racing and other high-performance wheel bearings and CV joints. The red moly compound and synthetic formulation give it a much higher load carrying capacity than black moly disulfide greases. Its excellent low-temperature flow, high-temperature stability, and very high drop point (melting point) of 900° F + (480° C+) allow it to be used at temperatures ranging from -100° F to 500° F (-70° C to 260° C), compared to a commercially available off the shelf CV Grease which has a sphere of operation between -10°C and 120°C CV2 is far superior.

It is highly resistant to oxidation and corrosion, and it has minimal effect on rubber seals. Automotive applications include wheel bearings, CV joints, U-joints, and general chassis lubrication.

CV2 Technical Info

CV2 Technical Info

 

Astra VXR Sprint.....

%d bloggers like this: